Romanian Sks Cleaning Rods I'm Having To Manually Pull Back The Bolt To Eject Shell/load New Round Into My Romanian Sks?
I'm having to manually pull back the bolt to eject shell/load new round into my Romanian sks? - romanian sks cleaning rods
I bought a Romanian SKS a month ago, the first thing I did when I held my house shall be dismissed, all clean and a new gas pipe (the gun was sold to me without a gas burner). When the fire that I have to pull the bolt to take the spent round and load a new business in the area. Who knows what it takes to solve this problem?
|
8 comments:
When the bolt cycling, but not the designation, it is likely that the hood of the screw, do not ride a bike, has a gas pipe-piston end.
The fact that you have purchased, with the gas hose is really suspect missing ...... Get in and be checked gunsmith. the previous owners have turned around and threw the other leg, which could be dangerous.
There is a gas valve at the front of the weapon can be disabled. If you need to manually eject the tank of his car with him that the payment is to eject your account. But if it does not make Wouk O-rings have gas in the tube, which is usually a different problem with them other than i dont know and share!
There is a gas valve at the front of the weapon can be disabled. If you need to manually eject the tank of his car with him that the payment is to eject your account. But if it does not make Wouk O-rings have gas in the tube, which is usually a different problem with them other than i dont know and share!
Are you sure that you have all parts of the gas system? You need to find a detailed Scematic all parties agree, and then find an illustrated guide for the safe removal with everyone in the situation. A piston or spring failure can cause this error.
Clean the gas port .... is the only one that goes from the barrel at the front of the gas tube? When this cycle is not blocked.
The first thing that strikes is that you do to me, "said pipeline" but not "gas lift".
The first thing that strikes is that you do to me, "said pipeline" but not "gas lift".
One of two things: a. .. They have a gas in the tube-or B-Crimp ... Ejector spring is worn. Good luck
Sounds like an ejector bad.
Post a Comment